▷ Colorful concrete concrete: how to choose your color?

Colorful concrete concrete: how to choose your color?

There are several solutions to create a colorful cemetery, here we often meet:

Cement floors paints are available on the market, some of which are marked for industrial use. However, the preparation is essential: if the cement slab is not porous enough, the painting can flake once the ground has been put into service. In addition, if you want to color a larger surface, such as industrial soil or warehouse, the paint can take a long time, to be expensive. The paint is probably more suitable for a small area with low traffic.

It is noticed That soil paintings are never a good option, even the most resinous and solvents painting, age on stressed surfaces such as floors.

Tinctue and coloring

The dyes based on acid and water cause a chemical reaction in concrete to create permanent color effects on the surface. The concrete can be colored even if it has been taking place for a while. It is possible to create motifs and varieties for tincture different areas of the floor with different colors.

Acid -based dyes offer less colors than water -based ones and the nature of the process means that the results can vary from one floor to another. Acid -based dyes also tend to produce translucent results, which can mean that stains on the ground will always be visible. Water -based colors can be stronger.

The colors also provide a permanent color and are generally based on water or solvent. Concrete color permeating the surface, not with a chemical reaction; The results can be translucent with water -based dyes.

Cerato cement of Biolotment

Colored using natural pigments and a multitude of colors are available, from the softest to the most supported, there is something for everyone and for all atmospheres and all styles. But we are going further to satisfy you because we know that the choice of color is an essential criterion for obtaining a personalized shadow, you can also provide witnesses of the color you want to achieve and Bioloooly thanks to its innovative techniques will create a faithful reply

The resin -based coating system

This is an option for new and existing floors. Resin coating systems – such as the Rinol Rinol products – Add color and shine to industrial, commercial and residential land and can also be used to create decorative motifs.

The liquid components of the system are mixed and applied to the slab, where they harden to form a hard polymer surface; The surface can be built in two or three different structural layers based on cement.

For existing floors, the preparation is essential to ensure a good result: the surface must be clean and sufficiently permeable to accept the resin coating. In any case, the creation of the resin floor can take several days, because the layers must harden. Therefore, time and cost must be taken into consideration.

Color hardener

A colorful concrete hardeer – also called the colorful surface harvest – can be applied to new and existing floors. A current method of application consists in applying a dry dust on the concrete just sunk. The powder is applied as soon as the cement has been supervised. This contributes to making surface crops a profitable means to color a great industrial or commercial land or even land sections of different colors. For small surfaces, a surface hardener can be applied mechanically or manually.

Biolooly recommendation: coloring of concrete mixture

Unlike the chemical resin and the above mentioned, the organic offers you a mixture of pigment with waxed cement powder which is a very ecological solution and allows to obtain a colored coating ready for use, for one of the living and thin shades for an authentic and mineral rendering. Depending on your tastes and the rendering you want, you can choose to get more or less Moirs using simple techniques during installation.

Colorful concrete concrete: how to choose your color?